Zolta 1300mAh 3S 30C


 
Sales & General Enquiries:    Please WhatsApp to +65 97203875 or email to sales@zenmtech.com   
    GST Reg No: 201213053N

    Technical Support:    Please WhatsApp to +65 97206258 or email to support@zenmtech.com

Lipo, Align 30C 3S1P 1300mAh

SKU: RC98033132

Be the first to review this product

Availability: In stock

US$19.73

Quick Overview

Lipo, Align 30C 3S1P 1300mAh

Lipo, Align 30C 3S1P 1300mAh

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Details

Lipo, Align 30C 3S1P 1300mAh

Product:
Instruction: Specifications:


● This Li-poly battery features high efficient and high discharge, use a inspection machine to match packs, suitable for MR25 series and other professional model airplanes, cars, and guns.

● Max Continuous Discharge: 30C(39A), Burst Discharge: 40C(52A). Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.

● Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

NOTE:

When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.

Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35℃ in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

Do not leave the charger is operating unattended as it may cause a fire.


● Output: 11.1V 1300mAh 14.4Wh(3S1P)

● Support 5C charging.

● Dimension: 74x36.5x21mm

● Weight: 115g

● Using 14AWG wire, thermal resistance: 200°C, max continuous current 50A.

Additional Information

Brand Align
Cell Type-Voltage 3S1P 11.1V
Capacity 1300mAh
Discharge Rate 30C
Max Charge Rate 3C
Dimensions 21mm (W) x 36.5mm (H) x 74mm (L)

 

Product Weight 115g
Discharge Connector Type XT-60
MPN HBP13001T

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

(Last Update: 15 Aug 2018)